03/26/2019
Controller module for complex motion sequences
With the Commander Controller Module CMD-4EX-CR (in distribution from Dynetics) a 4-axis motion controller can
be integrated on a own PCB. The freely programmable multi-axis control considerably shortens development and
product launch times.
Read More
03/26/2019
Intelligent plug-in connector with electronic signal processing
The trend towards digitalisation in industry requires new solutions, this also applies for components that were
previously purely electromechanical in nature. Because without a powerful, comprehensive infrastructure,
digitalisation hits its limits fast. The infrastructure includes plug-in connectors and cables whose
significance is set to rise and for example will be reflected in intelligent plug-in connectors. Weidmüller is
presenting a demonstrator for an intelligent connector for the first...
Read More
03/26/2019
New pressure sensors with IO-Link
At the Hannover Messe (Hall 9, Booth H55) Turck is presenting the PS+ series pressure sensors as the first of a
new fluid sensor series. They combine functionality together with award-winning design. The keypad features
capacitive touch pads that enable unimaginably simple operation. The absence of mechanical operating elements
increases robustness and helps to meet the requirements of ISO protection types IP6K6K, IP6K7 and IP6K9K.
Flexible installation (overhead and rotatable around 340°) and...
Read More
03/26/2019
D-SUB hoods and connectors with quick locking
The CONEC SnapLock versions of the D‑SUB hoods are suitable for applications requiring high vibration and shock
resistance.
Read More
02/20/2019
Bosch Rexroth introduces the IoT Gateway as part of its Industry 4.0 Technology Portfolio
At the ATX West Bosch Rexroth presented a unique combination of hardware and software. The IoT Gateway
demonstrates the latest in Industry 4.0 technology. For new and existing machines, Bosch Rexroth’s IoT Gateway
connects to the Internet of Things (IoT) without intervening with automation logic.
Read More
02/20/2019
FPC/FFC Test Sockets – Made in Germany
The new FPC/FFC test sockets from Yamaichi Electronics are developed and qualified in Munich and produced in its
own production site in Frankfurt (Oder). This guarantees the fast implementation of all individual requirements.
The high level of vertical integration enables top quality with short lead times.
Read More
02/20/2019
Secure your Factory: Industrial router provides Edge Computing
Data is the new gold. But instead of transferring a large amount of raw data directly into the cloud, the
pre-processing of data at the edge of the network – edge computing – is increasingly favored. With mbEDGE, the
collected machine and sensor data is evaluated locally and only the results are transferred to the cloud
application.
Read More
02/20/2019
Compact and Powerful Digital Servo Drives for Demanding DC-Powered Motion Control Applications
Applied Motion introduces a new line of SV200 Digital Servo Drives for DC-powered motion control applications.
Operating on 24, 48 or higher DC voltages (up to 60 volts DC), the SV200 Servo Drives offer advanced performance
with multiple controls to address the requirements of machine builders and OEMs, especially for multi-axis
applications.
Read More
02/20/2019
Prefabricated cables with plug‑in connectors for machinery and plant engineering
Increasingly, classic control cabinet applications are installed in the field and equipped with communicative
components. This increases the complexity and quantity of the cabling. Prefabricated and tested cables enable
time savings of up to 75 percent and simplify installation in difficult plant conditions. To cater for these
requirements, Weidmüller offers high-quality plug-and-produce solutions for IP20 and IP6x environments.
Read More
02/20/2019
Servocontroller featuring machine learning, analytics and WiFi
The intelligent TITAN servomotor controllers from Arcus Servo Motion (represented by Dynetics GmbH) support the
Servo 5.0 standard, which was designed for applications in the field of Industry 4.0, Smart Factory and
Industrial Internet of Things.
Read More
02/20/2019
Mecademic started its 2019 world tour with ATX West
Less than three years after the Meca500, the probably smallest and most precise industrial robot arm, was
introduced to the market, more than a hundred manufacturers in the electronics, medical device, and automotive
industries use the robot to automate various testing and production operations.
Read More
02/20/2019
Detect temperatures using direct media contact
Balluff is expanding their range of sensors for media-contacting temperature detection, in hydraulic power units
for example. New are a temperature sensor with display, a temperature transmitter as well as a PT1000 sensor.
Read More
02/20/2019
Interference-free transmission with the Ethernet media converter
The new FL MC EF 660 SCRJ media converter from Phoenix Contact enables the connection of cost-effective polymer
and HCS/PCF fiber technology.
Read More
02/20/2019
Field-attachable connectors
The increasingly decentralized automation requires flexible and individual wiring in certain areas directly in
the field and at the machine with field-terminable connectors in various connection technologies.
Read More
02/19/2019
Rackmount Systems for demanding environments: Kontron’s new KISS series
Kontron's rackmount systems are designed and tested for challenging environments, and are therefore the perfect
fit for extreme temperature and mechanical stress conditions.
Read More
12/10/2018
These robots crawl into every nook and cranny
It started as a project by two engineers who were close to retirement. Today, the modular inspection robots by
Canadian company Inuktun are successfully in use all over the world – defying even the most adverse conditions.
Read More
12/10/2018
Components for mechatronics
Dynetics offers an extensive range of motion controller modules, worm gear motors, servo motor controllers,
stepper motor drives and controllers – all suitable for complex mechatronic applications.
Read More
12/10/2018
Push-pull connectors ‘Made in Germany’ for future-proof industrial applications
Yamaichi Electronics highlights three push-pull connectors for future-proof industrial applications. The three
connectors are manufactured in Frankfurt/Oder.
Read More
12/10/2018
Enterprise Linux versus Embedded Linux
Linux is one of the most widely used open source operating systems and is available in many different variants.
This wide set of choices can make it confusing and challenging to determine the right version for a given use
case. Wind River's article offers an introduction to Linux for the enterprise and Linux for embedded products.
Read More
12/10/2018
Extended Ultrasonic Sensor Portfolio
The more compact the machine and plants, the greater the demand for small sensors. If these devices also involve
short blind zones, they soon become the universal tool for restricted spaces. Turck has therefore added ten more
miniature sensors to its RU ultrasonic sensor series. Twelve new types were added to the RU-Eco series with
devices made from highly resistant liquid crystal polymer. This comprehensive portfolio enables the automation
specialist to offer the right ultrasonic solution for...
Read More
12/10/2018
Smart optimization rather than investment
Numerous companies are sceptical, hesitating to take the step to digitalization. As an industry pioneer in the
area of I4.0 grippers and real-time simulation, Zimmer Group is ready to convert the few remaining doubters and
naysayers. The company now offers their customers integrated solutions (“digitalZ”) that are tailored to the
software platforms of the customers.
Read More
12/10/2018
Components for automation technology from Panasonic
Panasonic Industry is well known for its extensive automation technology portfolio with industry-leading
innovations and components. With this article, WA3000 Industrial Automation reports about Panasonic's core
competencies in the areas of safety technology, energy management and efficiency.
Read More
12/10/2018
IO-Link master modules in the IP20 and IP67 degree of protection
IO-Link is considered key technology for implementing industry 4.0 and IIoT concepts. For this technology
Weidmüller provides IO-Link master modules in IP20 and IP67 degree of protection. Plug-in connectors and
pre-assembled cables for the bus connection as well as sensor/actuator cabling complete the product portfolio.
The parametrisation and configuration of IO-Link devices can be performed with a web‑based configuration tool
that contains an interface to the manufacturer‑independent...
Read More
12/10/2018
Balluff SmartCamera: Intelligent data management contributes to stable production processes
Industry 4.0 – the smart, adaptive factory with short retooling times and decentralized control – aims to
generate the most comprehensive data possible within a highly automated process in real-time and provide the
most varied instances possible. This status information in the form of process data for control and monitoring
of sequences and product data for traceability and quality verification form an objective basis for making
decisions in order to take early measures for process optimization.
Read More