As a representative of renowned manufacturers, Dynetics offers a wide range of rotary and linear miniature drives together with the associated control electronics in various technologies. The range is supplemented by fans and radial blowers for the cooling of equipment.

Waterproof push-pull connectors are suitable for harsh environments in mechanical engineering as well as for use in medical technology. Yamaichi Electronics has introduced a compact concept designed for up to 5,000 mating cycles. Easy assembly and increased reliability characterise this T series, which enables data rates of up to 10 Gbit/s under harsh conditions.

The portfolio of ICP Germany expands with the versatile AFL4-ADLP Fanless All-in-One PC series: It is the ideal solution for areas such as factory automation, retail, digital signage, and POS (Point of Sale).

Digital automation concepts for battery cell production with RFID, IO-Link, OPC UA and Ethernet guarantee flexibility, reliability and fast ROI. The availability of high-performance batteries at moderate prices is one of the most important factors for the success of electromobility. Short innovation cycles and increasing competition are major challenges for battery manufacturers and carmakers, which above all require flexible, digitized production lines – and automation companies that support...

The 250 W CUS250M power supply from TDK-Lambda optimised for medical applications and is also a good choice for industrial applications where very low values for earth leakage current, touch current and excellent EMC behaviour are important. The power supply complies with IEC 60601-1, a series of international standards for basic safety and essential performance of medical electrical equipment. It is widely used in many countries and is now deemed a requirement for most commercially available...

In order to save time and thus costs, ease of maintenance and speed of installation are playing an increasingly important role in industrial cabling. Overmoulded connectors with snap termination can be quickly and easily plugged onto sockets, sensors and actuators without any further work steps or tools.

MASS GmbH is your reliable partner for individual industrial computers, HMI operating terminals, large displays for digital signage and industrial Raspberry Pi systems – in Germany and worldwide. Even for small annual requirements, you are at the right address with us. MASS develops customised special devices even for small quantities. Our focus is on supplying turnkey solutions – with pre-configured software on requests.

A win-win for companies and the environment - AfB social & green IT, Europe's largest non-profit IT company, has specialised in refurbishment, collaborates with more than 1,600 companies, refurbishes their used hardware and brings it back into the economic cycle.

Today, most linear-motion designs execute their strokes with actuators based on stepper motors or brushless DC (BLDC) servo motors. A leading player in this field is KSS, which offers mini actuators of the CAS series (distributed by Dynetics) with precise, short strokes for use in single and multi-axis assemblies. In some applications, linear shaft motors are the better choice because they have virtually maintenance-free operation throughout their entire service life and, due to their design,...

Spectra Silent wDL series: IP65 panel PCs with all-round protection - Industrial Panel PCs with IP65 protection class have long been established as reliable and robust operating devices for controlling machines and systems in adverse production environments.

The new TAS Turck Automation Suite simplifies the management and configuration of Turck devices in industrial Ethernet networks. In particular, the batch functions speed up many operations.

Fanless high-performance computer BOXER-6406-ADN for automated guided vehicles (AGVs), edge gateways and automated manufacturing - BRESSNER Technology GmbH, a renowned system integrator and one of the leading value-added distributors in the field of industrial hardware solutions, announces the official launch of the BOXER-6406-ADN. This compact and fanless embedded computer system, based on the Intel Atom ® Processor X Series/Intel® Processor N- Series platform, is the latest product from...

From component to system - HY-LINE has been serving many customers in automation technology for 35 years. As of 1 September 2023, the company has bundled its application know-how in HY-LINE Technology GmbH. According to the motto "Everything from a single source", customers benefit from the strategic reorganisation of the company.

Conec M12x1 two-part angled PCB socket connectors allow flexible connector solutions in assembly and production lines.

Due to their very small design and the one-piece zinc die-cast housing, the P67 D-SUB CONEC SlimCon connectors are ideally designed for industrial and harsh environments where not much installation space is available. Compared to an IP67 protected connector with an extended sealing frame, a reduction of the occupied area of up to 52 percent is achieved.

PERI 3D Construction’s project showcases 3D construction printing's potential beyond low-rise residential housing, utilizing COBOD's BOD2 printer.

KBox C series: Scalable Kontron industrial computers for AI applications.

TDK Corporation presents 6-Watt and 10-Watt DC-DC converters of the TDK-Lambda CCG series, suitable for either through hole or surface mount placement. This expands the CCG series to cover 1.5 W to 30 W. In addition to battery powered equipment, applications include process control, data communications, telecommunications and test and measurement related products.

RECOM has added a 60 W board-mount DC/DC with high power density and medical-grade isolation to their portfolio. The REM60-W targets medical and demanding industrial applications.

Think green – act responsibly on electrical connectivity solutions. Generating renewable energy is supposed to make an important contribution to limiting climate change. But it is not enough to focus solely on the production of "green electricity”. In this segment, too, it is important to use resources sparingly and promote sustainability. Examples from WECO show how it can be done.

TOUCAN PRO II Premium Panel PCs with 12th Generation Intel® Core™ Processors and Intel® Iris Xe graphics card. BRESSNER Technology, a leading system integrator and value-added distributor, announces the launch of the TOUCAN PRO II panel PC series. These fanless all-in-one Windows panel PCs offer powerful Intel® Core™ 12th generation processors and advanced Intel® Iris® Xe graphics architecture. The series is specifically designed for demanding multimedia and industrial applications in the...

NX™ is a software platform from Siemens that supports product development, simulation, and manufacturing, including additive manufacturing. For Simulation Driven Design, Siemens has made several enhancements to the NX™ CAD/CAM software, including Topology Optimizer and Design Space Explorer. The combination of these two products makes it possible to create a comprehensive digital twin of a 3D model while easily validating multiple design options. Simulation Driven Design is an approach in the...

CONEC junction system typ S, M, L withstands the toughest conditions - Miniaturisation in automation means that field devices and controllers are becoming smaller and smaller. The CONEC junction system provides a flexible way to integrate moulded branches and outlets in electrical connection lines such as e. g. cable harnesses. This ensures that the continuous lead sheathing retains its full functional integrity even at the splice site of the junction system.

Your desired display. Our solution. Do you need a customized display developed specifically for your application? Then contact us, we will be happy to advise you on your new display project. We can provide you with individual display solutions for the industry: from LCD modules to TFT to embedded HMI products.