08/25/2021
Supercapacitor with ultra-low leakage current to combine with lithium batteries
Supercapacitors may be combined with batteries to add the advantages of high capacity and low internal
resistance. Low leakage currents will extend battery life in this application. HY-LINE Power Components now
offers a new model optimized specifically for this use case.
Read More
08/25/2021
5G router for industrial monitoring and service solutions
The Scalance MUM856-1 – the first industrial 5G router from Siemens – connects local industrial applications to
public 5G, 4G (LTE) and 3G (UMTS) mobile wireless networks. The router can be used to remotely monitor and
service plants, machines, control elements, and other industrial devices via a public 5G network – flexibly and
with high data rates.
Read More
08/25/2021
Local dimming of high‑resolution displays
Since time immemorial, many display manufacturers have been advertising ever higher resolutions for their
panels. Yet resolution is only one of many characteristics of a high-quality display. For some years now,
displays can be produced with such a high resolution that this criterion has become secondary. A high pixel
density also has disadvantages with regard to the brightness or contrast ratio of displays. DMB Technics
explains the advantages of local dimming and how this solution becomes...
Read More
08/25/2021
Compact power supply for PCB mounting
New TDK Lambda KPSB series in cost-effective protection Class II with 5 to 25 W and wide operating temperature
range. TDK Corporation announces the introduction of the KPSB6 series of 5 to 6 W and the KPSB25 series of 20 to
25 W board mount AC-DC power supplies. Certified to the IEC 62368-1 standard for Audio/Video, Information and
Communication Technology Equipment, the products have a Class II input requiring no earth ground.
Read More
08/25/2021
Embedded Systems: From the PLC to the IoT controller
When automating production lines according to IoT, the controls of all individual machines are networked with
one to another and integrated into the Internet. This requires IPC and communication functions, so new hardware
and software are necessary. MASS has developed a solution for this environment based on the Raspberry Pi.
Read More
08/25/2021
High Dynamic Inclinometers
Turck's inclinometers with IO-Link combine MEMS and gyroscope signals for moving applications and allow fast,
reliable measurement even when subject to mechanical interference.
Read More
08/25/2021
Fully automated end‑of-line test bench for BMW eDrive
The latest generation of electrified drives is produced at the Dingolfing site in Germany, the BMW Group
competence center for e-drive production. Here, KUKA implemented a fully automated test system for testing up to
eight different drive variants. For more than 35 years, KUKA has been successfully integrating assembly and test
systems for the automotive industry internationally and optimizing their production through efficient automation
solutions.
Read More
08/25/2021
RJ45 Interface for the Industrial Sector
IP20 metal housing with tool-free click assembly for RJ45 connector Y-Con. The new Y-Con Cover 20-TC replaces
the current version of Y-Con Cover 20, which has a great acceptance in the market for many years. Like Y-Con
Cover 20, the new Y-Con Cover 20-TC is an IP20 full metal version, which protects the plug from all kind of
influences in an IP20 industrial area.
Read More
08/25/2021
Connectors for automation technology
Whether Industry 4.0, Factory Automation or other areas of automation – the challenges are almost the same:
Increasingly faster data transmissions are required, sometimes even in real time, and the data volume is
increasing, the available installation space remains limited, connectors have to be locked quickly and securely,
and there is high-cost pressure. In this environment, connectors that meet the corresponding technical
requirements are in demand. In the automation sector, CONEC has a broad...
Read More
06/22/2021
High-performance direct‑drive actuator
New drivetrain enables more productive robots, machines and factory floor space. Genesis Robotics & Motion
Technologies presents the new LiveDrive® LDD 1800 Series Direct Drive Actuators, with an extensive range of
configurations and performance options. LiveDrive® direct-drive actuators eliminate the need for gearing and are
redefining the next generation of parallel robots and precision machinery, unlocking capabilities beyond the
reach of conventional drivetrains, across many applications.
Read More
06/22/2021
Multifaceted indoor-deployed sensor module with high-performance computing resources
Pushing the performance envelope with advanced edge-based hardware, Sfera Labs has introduced its latest
multi-sensor module. The Exo Sense Pi leverages Raspberry Pi 4 computing capabilities. This compact wall-mount
unit features a 64-bit quad-core ARM Cortex-A72 processor running at up to 1.5 GHz, which is way beyond what
other sensor modules on the market can deliver.
Read More
06/22/2021
Small pixels for higher image quality
Compact 29×29 mm industrial cameras with Sony Pregius S sensors up to 24 MP. Baumer is expanding its CX series
with the 4th Sony CMOS sensor generation Pregius S with up to 24 megapixel resolution. Thanks to a pixel size of
mere 2.74 µm and backside illumination pixel architecture, the camera has a very compact design (29 × 29 mm) and
offers very high resolutions with excellent image quality and improved sensitivity for stable image evaluations.
Read More
06/22/2021
Intelligent electronic skin
Capacitive silicone force sensor SXTSC1 by Sateco. Through its subsidiary, Sateco XT AG, Sateco is breaking new
ground and adding the capacitive silicone sensor SXTSC1 to its portfolio of established keypad systems. The
elastomer sensor works according to the capacitive operating principle and can continuously measure both touch
and compressive force.
Read More
06/22/2021
Inductive sensors for CFRP detection
Turck has added the world's first inductive sensors for detecting Carbon fiber reinforced polymer to its
portfolio. Turck has developed the world's first inductive sensors for detecting carbon fibers. The sensor
series detects both carbon fibers as well as pressed CFRP parts.
Read More
06/22/2021
Portable thermal imaging cameras for every application
Save energy and costs, accelerate decarbonisation, prevent damage, check terrain: Seek Thermal's Compact and
Reveal models can be used in many ways. The thermal imaging cameras of the Compact and Reveal series from the
Californian company Seek Thermal combine a multitude of functions in a very small space. The Compact, Compact XR
and CompactPro models are about the size of a USB stick and are available for iOS and Android devices.
Read More
06/22/2021
New industrial network solution Digi IX15 combines gateway and router
Bressner Technology, a leading provider of hardware and software solutions, expands its IoT portfolio with the
Digi IX15. It is the only fully functional industrial cellular gateway with Zigbee support. The Digi IX15 serves
as both a gateway and a router, providing mission-critical applications with a suitable network platform.
Read More
06/22/2021
Advanced industrial motion control
Dynetics presents the SOMANET servo drives from Synapticon: Integrated motion for robotics, machine building and
autonomous industrial systems. Synapticon, based in Schönaich near Stuttgart, Shanghai and Redwood City (Silicon
Valley), is reshaping the world of motion control for robotics and machines at the point of motion. The company
is introducing an entirely new approach to motion axes by integrating formerly discrete components such as
motors, drives, sensors and gears into seamless units,...
Read More
06/22/2021
Rugged connectors for tough requirements
CPC-connector series overmoulded – single outlet, double outlet & termination caps. CONEC has expanded its
range of agricultural connectors to include overmolded versions of the CPC connector series. In addition to
agricultural and automotive engineering, CPC connectors are frequently used in control cabinets, robotics,
injection molding machines and machine tools.
Read More
05/25/2021
Industry 4.0 and Additive Manufacturing
CoreTechnologie's 3D printing software 4D_Additive enables quality check, repair and preparation of models in
accordance to CAD‑engineering standard. Considering the demographic development and the fact that the baby
boomers will retire within the next fifteen years, industrial production will have to be guaranteed in the
future with increasingly scarce human resources. A drastic population decline is also forecast in China. Thus,
the disappearance of the world's extended workbench is a very...
Read More
05/25/2021
Image processing in a new dimension
Spectra PowerBox 5000: Scalable high-end GPU computing system. Modern processes in industrial AI and machine
vision are closely linked to image processing. This requires industrial PC systems with CPU and GPU performance
large enough to process the tasks in real time.
Read More
05/25/2021
Increased efficiency of device production
M12x1 insulation body and housing, L-coded, THR. CONEC has expanded its portfolio of M12 connectors to include
L-coded axial THR variants (THR = Through Hole Reflow), thus offering a compact, powerful solution for supplying
power to automation devices.
Read More
05/25/2021
Human Digital Twin: The digital counterpart to the human worker
Wearables from ProGlove make humans a driving force of Industry 4.0 and digital transformation. The Digital Twin
is a digitized model that maps the physical characteristics of a production environment as well as the
processes. But this mapping has its limitations, as it only includes data from machines and not from humans. At
the same time, human employees will continue to play an important role in the Fourth Industrial Revolution, also
known as Industry 4.0. The challenge lies in combining the...
Read More
05/25/2021
The future of fast data transmission
With the Y-FLEX high-speed FPC you can establish data rates of 56 Gbps (PAM4) over a cable length of 100 mm.
Conventional technologies such as Flexible Flat Cables and Flexible Printed Circuits (FFC/FPC) or micro-coaxial
cables cannot cope with requirements for extremely high reliability and continuously increasing data
transmission rates between internal printed circuit boards. The Y-FLEX technology of Yamaichi Electronics solves
this problem.
Read More
05/25/2021
Panasonic IoT solutions
With a broad automation product portfolio and technology solutions, Panasonic Industry is the partner for
setting up solutions for fully connected production lines.
Read More