The rapid design solutions using TDK-Lambda’s buck and buck-boost DC-DC converters enable a stable power supply, which is essential especially for mobile and stationary robotic components. They offer excellent load regulation, high efficiency, and a compact design in open-frame, baseplate, heatsink and ruggedized case options. The wide input range enables seamless operation with various battery voltages. Thanks to the wide output voltage adjustment range, a single converter can easily be used for different system voltages. Identical pinout across a power range from 100 W to 1500 W allows for scalable power designs. Their low weight permits a greater payload for the intended application.

TDK Corporation has expanded its TDK-Lambda HWS3000 series of programmable 3000-W AC-to-DC power supplies to include the HWS3000GT4 model. This new model is now available with a new option for a wide three-phase input range of 340 to 528 VAC and can be used, for example, in test and measurement, semiconductor manufacturing, RF amplifiers, laser processing, printing, and industrial equipment.

RECOM Power offers the RACPRO1 family of universal DIN-rail power supplies in single-phase and three-phase versions. The new single-phase RACPRO1-S series, with output powers of 120 W, 240 W, and 480 W, saves space in the control cabinet and impresses with high efficiency, tool-free wiring, and durability – ideal for harsh industrial environments, outdoor applications, and the renewable energy sector.

When space and cost are at a premium, the RECOM RACPRO1-S120 DIN-Rail PSU is the solution. Offering 120 W output power from -40° C to +60 °C ambient in convection-only cooling, the part is just 1000 wmm high, 112 mm deep, and 28 mm wide, achieving 500 W/liter power density and an efficiency of up to 93.3 percent.

RECOM is launching the RACPRO1-S480, a new cost-effective and compact DIN-Rail PSU (Power Supply Unit) rated at 480 W in convection cooled environments from -40 °C to +60 °C, in a format of just 135 x 140 mm, 52 mm wide. Additionally, the parts can deliver 576 W up to 45 °C and 720 W for five seconds, avoiding the need to over-specify a converter to cope with surge loads.

TDK Corporation introduces the TDK-Lambda TPS4500 single- or dual-output industrial power supplies with a 4500 W rating. The modules can be configured to share the loads in any proportion, up to the rated output specifications, and are designed to operate in series or in parallel to increase the output voltage or power.

KBR EnergyManagement's intelligent grid monitoring prevents production downtime caused by power fluctuations. Without continuous monitoring, businesses cannot identify what caused the disruptions. Continuous power quality monitoring in accordance with DIN EN 50160 provides clarity here. It enables targeted troubleshooting whilst simultaneously identifying specific opportunities for stabilization.

Smart factory automation in the edge-computing era is markedly different. It demands significantly more distributed and centralized computing power, together with far stricter power requirements. RECOM's compact DIN-rail power supplies provide a solution for powering today’s smart factories.

Reducing costs, minimizing risks, and unlocking flexible, profitable energy use: the Berlin-based cleantech startup FION uses AI-powered battery storage for boosting companies’ profitability. The central lever is the company’s proprietary AI dispatch engine for battery storage systems. It automatically controls electricity flows based on consumption patterns, tariffs, and market prices, eliminating the need for companies to operate their own energy management system.

RECOM now offers the RACPRO family of universal industrial AC/DC power supplies for DIN rails in single-phase versions. The RACPRO1-S series power supplies are available in models with output power ratings of 120 W, 240 W, and 480 W, featuring widths of 28 mm, 39 mm, and 52 mm, respectively.

Power supplies are the unsung heroes of industrial automation. At SPS 2025, RECOM will showcase its latest innovations in Hall 10, Booth 541. These include the RACPRO1 series and the new REFIN series that address the evolving demand for energy-efficient, reliable automation in harsh industrial environments.

TDK Corporation announces the addition of 1200 W rated models to the TDK-Lambda CUS-M series of 30 W to 1500 W AC-DC power supplies. These latest products have a 187 x 93 mm footprint and a low 42.5 mm profile. The CUS1200M features a variable speed fan with audible noise as low as 30 dBA at 20 percent load and 42 dBA at full load. The power supplies can be used in a wide range of applications, including medical, dental, test and measurement, broadcast, and industrial equipment.

High density, fully programmable, and easy to use: The programmable AC power sources in the GENESYS™ AC series from TDK-Lambda with 2-3 kVA and 6-9 kVA have a very high power density, output voltages from 0-350 Vac and ±500 Vdc (GAC PRO), and frequencies from 16 Hz up to 5 kHz.

The technical article by TDK-Lambda clearly explains the various aspects that need to be considered for heat dissipation in power supplies. Using the CUS250M power supply, which is available in different form factors, the author presents practical approaches to finding the optimal solution for each application.

A reliable power supply is the foundation of every automation solution. The following technical article by RECOM addresses the question of which requirements power supplies must meet in industrial manufacturing. High demands such as increasingly compact control cabinets, rising ambient temperatures, shorter maintenance cycles and intelligent systems set narrow limits for conventional power supply units.

The 200 W i1C series from TDK-Lambda is available in the industry-standard housing format (1 x 1 inch = 26.42 x 26.42 mm). The non-isolated buck-boost DC-DC converters (upconverters and downconverters) operate with input voltages ranging from 9 to 36 V or 18 to 75 V. The i1C series offers adjustable output voltages from 9.6 to 28 V with output currents of up to 10 A.

The RACPRO1 series from RECOM Power ensures greater efficiency and space savings in the control cabinet. With three-phase and integrated DC input, power range from 240 to 960 W, high efficiency, tool-free wiring and durability, the series is suitable for a wide range of industrial applications.

TDK Corporation announces the introduction of the single-phase D1SE series to TDK-Lambda’s extensive range of DIN-Rail mount power supplies. This entry-range series comes with an AC and DC input and is optimized for essential functionality, without compromising on performance or quality.

Features of RECOM's RACPRO1 Family

DIN-rail power supplies such as the RACPRO1 family offer many advantages for industrial applications but also present the user with a few challenges. The German Institute for Standardization (Deutsches Institut für Normung, DIN) is the official national standards body representing Germany internationally.

RECOM has offered DIN-Rail DC/DC converters for many years, but the company is now launching the REDIIN series of DIN-rail AC/DC power supplies at 90 V to 264 V input ranges and 120 W, 240 W, and 480 W power ratings.

Application: Secondary load is protected by a fuse switch or fuse

RECOM's RACPRO1 series includes high-performance three-phase DIN rail power supplies with outputs of 240, 480 and 960 watts in widths of 43, 52 and 80 millimeters. This technical article describes how to compensate for voltage drops, improve overcurrent protection and prevent damage. You will learn which measures are used to ensure that DC fuses and circuit breakers with the RACPRO1 series trigger safely.

TDK Corporation announces the introduction of the TDK-Lambda brand GENESYS™ AC (GAC) and GENESYS™ AC PRO (GAC-PRO) series of 2 kVA and 3 kVA rated programmable AC power sources. These latest products represent a significant expansion in test and measurement capability to the current GENESYS™ series of 750 W to 90 kW programmable DC power supplies. With a 1U chassis height, the GAC and GAC-PRO provide the highest power density for a fully featured programmable AC power source.

RACPRO1 series: High-spec, space-saving AC / DC DIN rail power supplies

RECOM, in collaboration with their recent acquisition, power specialist LECO, has launched a groundbreaking range of cost-effective, three-phase DIN rail power supplies. The RACPRO1 series includes models with power ratings of 240, 480, and 960 W, housed in ultra-compact enclosures with industry-leading widths of 43 mm, 52 mm, and 80 mm, respectively.

What if a standard power supply doesn’t meet your specifications? Do you need an additional cable, a special enclosure or another custom adjustment? The answer is Power+ Solutions. This program from TDK-Lambda transforms a standard product into a unique solution that you can immediately integrate into your applications, without worrying about issues like approvals, EMC, or supplier selection.