New Products

New drivetrain enables more productive robots, machines and factory floor space. Genesis Robotics & Motion Technologies presents the new LiveDrive® LDD 1800 Series Direct Drive Actuators, with an extensive range of configurations and performance options. LiveDrive® direct-drive actuators eliminate the need for gearing and are redefining the next generation of parallel robots and precision machinery, unlocking capabilities beyond the reach of conventional drivetrains, across many applications.

Read more

An intelligent multi-axis system – quicker, more convenient and more cost‑effective than ever before: Bosch Rexroth now makes this possible with the new Smart Function Kit for Handling. After the Smart Function Kit for Pressing and Joining, the linear motion technology experts are expanding the Smart MechatroniX solution platform with a second predefined subsystem which can be operated intuitively.

Read more

iTAC.​SMT.​Edge: Efficient solution for standardisation and centralisation of data in SMT production. Data is becoming more and more important in electronics manufacturing. It is the basis for increasing efficiency, avoiding errors and creating more value, for example through prevention and prediction services. SMT manufacturers and other manufacturing companies are faced with the challenge of having to collect and analyze data accordingly in order to be able to develop such services. Especially...

Read more

Weidmüller Klippon® Connect terminal blocks AITB for building installation. The requirements for building installations are manifold: Energy efficiency and safety are among them, as are flexibility and convenience, to name only the most important. The necessary infrastructure in a building requires numerous main, sub-distribution and small distribution boards as well as meter cabinets. What they all have in common is that they must accommodate very many functions in a very limited space.

Read more

If you have de­vel­oped your ap­pli­ca­tion on a Rasp­berry Pi® basis and are now faced with the prob­lem of hav­ing to use it in an in­dus­trial en­vi­ron­ment, ICP Ger­many of­fers with the ND108T an ad­e­quate re­place­ment.

Read more

With a broad automation product portfolio and technology solutions, Panasonic Industry is the partner for setting up solutions for fully connected production lines.

Read more

With the Y-FLEX high-speed FPC you can establish data rates of 56 Gbps (PAM4) over a cable length of 100 mm. Conventional technologies such as Flexible Flat Cables and Flexible Printed Circuits (FFC/FPC) or micro-coaxial cables cannot cope with requirements for extremely high reliability and continuously increasing data transmission rates between internal printed circuit boards. The Y-FLEX technology of Yamaichi Electronics solves this problem.

Read more

Wearables from ProGlove make humans a driving force of Industry 4.0 and digital transformation. The Digital Twin is a digitized model that maps the physical characteristics of a production environment as well as the processes. But this mapping has its limitations, as it only includes data from machines and not from humans. At the same time, human employees will continue to play an important role in the Fourth Industrial Revolution, also known as Industry 4.0. The challenge lies in combining the...

Read more

M12x1 in­su­la­tion body and hous­ing, L-coded, THR. CONEC has expanded its portfolio of M12 connectors to include L-coded axial THR variants (THR = Through Hole Reflow), thus offering a compact, powerful solution for supplying power to automation devices.

Read more

Spectra PowerBox 5000: Scalable high-end GPU computing system. Modern processes in industrial AI and machine vision are closely linked to image processing. This requires industrial PC systems with CPU and GPU performance large enough to process the tasks in real time.

Read more

CoreTechnologie's 3D printing software 4D_Additive enables quality check, repair and preparation of models in accordance to CAD‑engineering standard. Considering the demographic development and the fact that the baby boomers will retire within the next fifteen years, industrial production will have to be guaranteed in the future with increasingly scarce human resources. A drastic population decline is also forecast in China. Thus, the disappearance of the world's extended workbench is a very...

Read more

Driven by the need for high performance, integration between factory installations and IT-systems, there has been a growing acceptance of Industrial Ethernet within industrial automation. Atlas2 Plus is designed for the permanent monitoring of industrial networks with single or mixed architecture. This second-generation diagnostic tool takes fault detection and diagnostics to a much higher level.

Read more

CONEC has developed a compact hybrid connector system for combined power supply and data transmission according to CAT5 which is carried out by means of a specially developed hybrid cable. This single-cable technology corresponds to modern connection and interface wiring technology.

Read more

Weidmüller TTB series instrument transformer terminals connect safety-relevant components captive to the terminal block. In power transmission and distribution, current and voltage transformers are used primarily for protection and measurement functions. Weidmüller has developed the new Klippon® Connect TTB Series instrument transformer terminals for this application, for particularly simple and safe wiring – even within complex circuits.

Read more

maxon precision motors control the pitch of the rotor blades. Space fans are thrilled: NASA's Ingenuity helicopter has successfully completed its pioneering flight on Mars. This is the first time in the history of powered, unmanned spaceflight that a device has flown in a controlled manner on another planet – also thanks to DC motors that have been modified for this challenge.

Read more

Highly integrated, intelligent displays are in high demand these days. Most of the time, the modern HMI (Human Machine Interface) is complex and requires more processor resources than the control of the actual application. With a smart embedded display product, DMB Technics covers a large part of the requirements for current HMI and makes computing power available where it is needed.

Read more

With the new in­ter­ac­tive All-in-One PC AFL3-W07-AL2 ICP Ger­many ex­tends its port­fo­lio of com­pact PoE ca­pa­ble PCAP touch PCs for in­dus­trial use as op­er­at­ing and dis­play unit.

Read more

Spectra-Panel Z-Series meets requirements of the food, pharmaceutical and medical industries. Hygiene requirements are particularly high in the food, pharmaceutical and medical industries. Since the spread of particles, germs and other contaminants must be prevented at all costs, materials are used in the production process whose contamination potential is as low as possible.

Read more

The Wooden Touch Table is the latest application from Printec-DS. High-quality workmanship and extensive features enable fascinating applications. With its new touch table, the southern German manufacturer has created a scalable design that can be easily tailored to customer-specific requirements.

Read more

The Panel Mount HMI TANARO 7.0 BX PCT is designed for applications with high performance requirements. Garz & Fricke introduces the TANARO 7.0 BX PCT, the latest evolution of its existing family of Human Machine Interfaces (HMIs). The TANARO 7.0 BX PCT is the first HMI based on Garz & Fricke's new TANARO board.

Read more

Nippon Pulse Motor (NPM) – represented by Dynetics – presents a new compact series of direct drive servo motors.

Read more

Bressner Technology, a leading provider of specialized high-performance computing (HPC), has expanded its PCI Express Gen 4 product line with the introduction of the 4U Pro, a professional Gen 4 expansion platform that offers twice the performance of the previous Gen 3 standard.

Read more

The mobile app easymon from in-tech enables real-time monitoring of machines and plants - worldwide and locally. The app supports the open control platform PLCnext Control and is available from Phoenix Contact's PLCnext App Store. On request, the engineering specialist in-tech can develop customer-specific extensions. Modification to other control families is planned.

Read more

TDK-Lambda expands the TPS series with a power supply unit with 48 V, 83.3 A and 4 kW output power. The TPS4000-48 operates from an industrial three-phase input. It can automatically run from 400, 440, or 480 Vac nominal delta or WYE inputs, without wiring changes or the need for large, costly step-down transformers.

Read more

The leading trade fair for sensor and measurement technology SENSOR+TEST will take place digitally from 4-6 May 2021. On the three days of the trade fair, participants can expect a plethora of exciting topics dealing with the entire spectrum of measuring technology.

Read more